Switch Between Mode 1 And Mode 2 - Carson SKY EAGLE Betriebsanleitung

f. Switch Between Mode 1 and Mode 2
1.
Unscrew the screws in the transmitter
cover, shown as the picture.
4.
B1
A1
• Pull out the screw in A and mount it in A1.
• Pull out the spring in B and then mount it in B1.
• Switch from C to C1.
2.
Slightly separate the rear cover from the
front one of the transmitter.
B
A
C1 C
CARSON Helikopter SKY EAGLE 50 070 7042
Tool
3.
Pull out the pin D, as shown the picture.
5.
Pull in the pin D. Mount the rear cover and tighten
the screws, and move the throttle trim to the lowest
position. the switch process is finished.
GB
D
15