Control Mode; Controlling The Model - Carson FD Rapscallion Betriebsanleitung

controL moDe

This setting mode enables you to switch between Mode 1
and Mode 2. The standard setting is always Mode 1.
Mode 1: accelerate left / steer right
Mode 2: accelerate left / steer right
Switching between Mode 1 and Mode 2
1. Keep the "ST-TRAIM L or R" button on the transmitter
pushed down and then turn on the transmitter.
2. Now release the "ST-TRIM" button.
3. The change to Mode 2 is indicated by an audible
signal and an indicator on the display.

controLLIng tHe moDeL

1. Drive forward
2. Drive reverse
Trim
3. Left
Trim
control mode
Trim
2
21 // Gb