Assembling.the.round.handle; Attaching.the.shoulder.strap; Installing.the.blade; Fitting.the.saw.chain - FLORABEST FHE 550 B2 Betriebsanleitung

Before.using.the.high.pruning.saw,.you.
must:
-.assebling.the.round.handle

-.attaching.the.shoulder.strap

-.fitting.the.blade

-.fitting.the.saw.chain

-.tensioning.the.saw.chain

-.fill.up.with.chain.oil
Assembling the Round Han-
dle
The.Allen.key.( 26).can.be.found.in.its.
holder.on.the.quick.release.(
. 1.. Set.round.handle.(14).to.the.
desired.position.on.the.telescopic.
handle.
. 2.. Place.brake.arm.(7).on.the.tel-
escopic.handle.
. 3.. Screw.together.round.handle.(14).
and.brake.arm.(7).
. 4.. The.height.or.holding.angle.of.
round.handle.(14).can.be.adjust-
ed.at.any.time.by.slightly.loosen-
ing.the.screws,.pushing/turning,.
and.retightening.the.screws.
Attaching the Shoulder Strap
Fix.the.spring.hook.on.shoulder.
strap.(12).into.lifting.lug.(13).on.the.
telescopic.handle.of.the.equipment.
Installing the Blade
1... Loosen.blade.fixing.screw.(4).
and.remove.chain.wheel.cover.
(6).
. 2... Insert.blade.(2).with.the.central.
longitudinal.hole.over.central.
blade.guide.(16).
Fitting the saw chain
.
.
15).
H
.
.
The.tension.of.saw.chain.(1).is.important.
both.for.your.safety.and.for.the.function.
of.the.high.pruning.saw..A.correctly.ten-
sioned.saw.chain.will.increase.the.lifetime.
of.your.equipment.
•. Saw.chain.(1).is.correctly.tensioned.
•. When.the.saw.chain.is.tensioned.with.
. 1... Lay.out.saw.chain.(1).such.that.
the.bevelled.cutting.edges.of.the.
chain.links.point.in.a.clockwise.
direction..See.the.detailed.illus-
tration.
2... Place.saw.chain.(1).in.blade.
groove.(2).and.on.chain.wheel.
(18).
3.. To.facilitate.assembly,.position.
the.chain.tensioning.pin.(21).by.
turning.the.chain.tensioner.(5).
towards.the.blade.fixing.screw.
(4).until.it.stops,.before.fitting.
the.chain.wheel.cover.(6).
4... Replace.chain.wheel.cover.(6).
and.screw.on.blade.fixing.(4)..
5.. Blade.fixing.screw.(4).is.simply.
to.be.tightened.lightly.by.hand.
Hole.(20).on.the.blade.is.the.
holder.for.chain.tensioning.pin.
(21)..Thread.(19).is.the.holder.
for.blade.fixing.screw.(4).
. Ensure.that.chain.tensioning.pin.
(21).is.positioned.in.hole.(20).on.
the.blade.The.pin.must.be.com-
pletely.inserted.into.the.hole.
Tensioning the saw chain
if.it.can.be.pulled.around.blade.2.by.
hand.(wearing.gloves).without.sag-
ging.
9.N.(approx..1.kg),.the.gap.between.
GB
45