Initial Operation - VOLTCRAFT CT-6 Bedienungsanleitung

b) Test de câbles RJ45 installés
- Reliez la prise réseau à tester avec le support de sortie (7) via un
câble adaptateur adapté.
- Etablissez la connexion de l'autre extrémité du réseau avec la ter-
minaison de ligne externe de la même manière.
- Allumez le testeur de câbles via la touche test 2.
L´appareil vérifie automatiquement les conducteurs individuels
les uns après les autres.
- Le résultat du test s´affiche.
36
Do not leave the packaging material lying around carelessly since
such materials can become dangerous toys in the hands of children.
You should also heed the safety instructions in each chapter of
these instructions.

Initial operation

Put the cable tester into operation by briefly pressing the button and
it starts the line test automatically. After a few seconds, the test
result is displayed. After another 10 seconds, the device turns off
automatically.
In order to activate the signal (DiDu-DiDu-DiDu...) for line tracking,
keep the test button depressed for approx. 3 seconds. The active
function is signalled by the LED „TONE". In this function mode, the
device does not switch off automatically.
To deactivate, briefly press the test button.
Always turn the cable tester off when it is not in use.
21