Scope Of Delivery; Taking Into Operation - VOLTCRAFT CT-2 Bedienungsanleitung

8-pole western plugs. With the help of the two BNC-adapters you
can also test cables with BNC connection plugs. Every core of the
measured line is tested separately and the result is displayed via the
LED rows. You can test short connection cables directly at the main
device and lines which are already laid by means of the remote
receiver. The selection of the testing order can be done manually or
automatically.

Scope of delivery

- cable tester CT-2
- remote-terminator
- testing cable RJ 45
- 2 adapter cables RJ 45/BNC
- BNC-connection plug
- 2 reduction parts RJ 45 /RJ 11
- operating manual

Taking into operation

Make sure by means of the safety instructions and the technical
data, that the cable tester CT-2 is suitable fort he planned measur-
ing tasks.
Inserting / changing the battery
Before the first taking into operation or when during the use the
intensity of the LED-display is getting weak, you have to insert a
new 9V block battery (preferably Alkaline). Proceed as follows:
Push the grooved area of the battery case lid on the backside of the
cable tester and push the lid open downward. Now remove the bat-
tery clip, respectively the used battery with clip. When connecting
the new 9V block battery pay attention to the right position of the
battery poles at the clip.
18