Unit Configuration - Oase ProfiClear Premium Compact Gebrauchsanweisung

2.3

Unit configuration

 H Pump fed
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
—
—
—
32
33
34
 I Gravity fed Description
1 Container cover
2 Signal box with level detection device (3) and temperature probe (6)
The signal box is connected to the control system (23, 25)

3 Level detection device
Signals the water level in the filter system

4 Rollers for guiding the filter drum
5 Filter drum with six screen elements
screen elements for coarse dirt down to 80 µm in size (also optionally

available with 60 µm)
6 Temperature probe
monitors the water temperature

7 Air hose 9 mm
8 Hel-X 13 biomedia in moving bed filter chamber
9 DN 110 outlet
10 Meshed tube
Prevents the Hel-X biomedia from being flushed out

11 Aerator rod (two provided)
12 Rinsing pump for supplying the rinsing device (21)
13 DN 75 dirt outlet with slide valve
— 2 x adapters, 2 x 30° inlet bends with union nut for connection of the Bitron
UVC clarifier to 38 mm (1½ ") connections (16)
— Connection set for connecting filter pumps, 1 × 38 mm (1½ ") hose connector,
1 × 50 mm (2 ") hose connector, 1 × union nut for hose connector, 1 × 40 ...
60 mm hose clip, 1 × 90° (2 ") connection bend, 1 × union nut for connection
bend,
1 × flat seal (2 ") 56 mm × 43 mm × 3 mm
— 2 × 38 mm (1½ ") connection, closed with sealing plugs
optional connection for a Bitron UVC clarifier
— 1 x 50 mm (2 ") connection for connecting the filter pumps
18 DN 110 dirt outlet for coarse dirt
19 Drum motor for filter drum
the motor is connected to the control system (23, 24)

20 Dirt channel
collects the coarse dirt and rinsing water from the screen elements (5)

21 Rinsing device
sprays water at high pressure onto the screen elements (5) to rinse off the

coarse dirt
22 Grease for the drum seal
23 Control system
24 Connector for drum motor
25 Connector for signal box
26 Power cable
27 Connector for rinsing pump
28 Fuse holder
Fuse protection of the control system with 5 × 20 mm, T8 A 250 V safety

fuse
29 DN 110 inlet
30 DN 110 inlet with cover cap, for optional use
31 2 × ground stakes for installing the control system
32 9/4 mm transition piece
33 Tee
34 2 × cable binders for fastening the air hoses to the tee
- EN -
41