Symbols On The Unit; Assembling The Vacuum Cleaner - Oase PondJet Eco Gebrauchsanleitung

Properties
 Floating fountain for flexible installation in ponds and lakes, suitable for all ground conditions.
 Multifunctional nozzle already integrated.
 Simple installation thanks to float function.
 Impressive water display with a height and width of up to 3 m.
 Additional nozzle patterns and lighting set available as accessories.
Environmental Function Control (EFC)
When started up, the pump automatically performs a pre-programmed self-test (Environmental
Function Control (EFC)). The pump detects if it is running dry / blocked or submerged. The pump
shuts down automatically after 60 to 120 seconds if it runs dry/is blocked. In the event of a mal-
function, disconnect the power supply and "flood the pump" or remove the obstacle. Afterwards,
the unit can be restarted.
Dynamic Function
Numerous values for flow rates have been pre-programmed in the pump control system to cre-
ate a dynamic fountain with changing heights and diameters. If the dynamic function is acti-
vated, the pump is continuously controlled with these values.

Symbols on the unit

Assembling the vacuum cleaner

The unit must be completely assembled before it can be placed in the pond. Individual assembly
steps:
 Fitting the nozzle body
 Fitting the pump
 Fitting the nozzle
22
The unit is dust-tight and water-tight down to 4 m.
Protect the unit from direct sunlight.
Do not dispose of the unit with normal household waste.
Read the operating instructions.