TomTom LINK 300 Installationsaleitung Seite 20

EN
Alternative Mounting
Mounting external GPS antenna
If you install the TomTom LINK 300 in a place
where it is not visible, so that it does not have
a clear view of the sky, you need to use the
TomTom WORK external GPS antenna
accessory (part number 9L09.001) which
comes with an integrated magnet and an
adhesive pad. The TomTom WORK external
GPS antenna is not part of the standard
TomTom LINK 300 product package.
Important!
• Only use the GPS antenna from TomTom
WORK, else GPS performance will be bad
or not work at all.
• Tinted metallised windscreens or those
with integrated filament heating may
prevent good GPS reception. In this case,
place the GPS antenna in the rear window
or on the outside of the vehicle.
• The magnet of the antenna will remain
attached to the outside of the car at speeds
of up to 180 km/h.
• Install the GPS antenna in a place where it
has a clear view of the sky and is
unobstructed by metal objects.
• The GPS antenna must be placed with the
adhesive pad on an oil free, dry and clean
surface.
• Extreme temperature changes / differences
can affect the adhesive property of the pad.
• To grant GSM/GPRS reception choose a
place where the top side of the TomTom
LINK 300 is unobstructed by metal objects.
20