Electrical Connections; Setting The Time; First-Time Use; Ventilator Lag - hanseatic AC925EC3-S00E Gebrauchsanleitung

Electrical connections

• Please check whether the device's supply
voltage is compatible with the supply volt-
age used in your house (please see the
type plate).
• Please ensure you only connect the de-
vice to a professionally installed protective
contact socket with sufficient fuse pro-
tection (see „Technical specifications" on
page GB-30).
• The plug socket must be located away
from the reverse side of the microwave,
otherwise the plug will be in contact with
the backplate.
• Do not use any multiplugs, extension
cables, timer switches or remote control
systems.
After you have connected the mains plug with
the socket, a signal will sound and the display
will light up.

Setting the time

Adjusting dial
Mikrowelle
Auto Menu
Grill
+30s adjust
Uhrzeit/
Kombi.
Timer
Auftauen Heißluft
Select Uhrzeit/Timer
Set the time
adjust
Bestätigen
Start
Confirm
setting
press
Bestätigen
Start
Set the hour
adjust
Bestätigen
Start
Confirm
setting
press
Bestätigen
Start
Set the
minutes
adjust
Bestätigen
Start
Confirm
setting
press
Bestätigen
Start
The time is set.
In stand-by mode, the time display flashes
"Uhrzeit" (time).
After a short time, the display looks like this.

First-time use

Display
A slight odour may be produced during first
use. This is non-toxic and disappears after a
short moment.
0
Timer
00
• Allow the device to run for 10 minutes at
200°C in convection mode (see „Convec-
tion mode" on page GB-20).
00
Uhrzeit
00
00
Uhrzeit

Ventilator lag

00
After the cooking time has finished, the fan
14
Uhrzeit
will continue to run for a few minutes to cool
00
the device down. The duration depends on
how hot it is in the device.
14
Uhrzeit
00
14
Uhrzeit
26
14
Uhrzeit
26
Page GB-13
Start-up
Auto Menü Vitalprogramme
Mikrowelle
Grill
Heißluft
Kombi.
Auftauen
Uhrzeit
26
Timer
Uhrzeit
26