Getting started
1. Position the roller ring (6) centrally into
the recess in the cooking chamber floor.
2. Place the turntable (3) centrally on the
roller ring. Turn the turntable (3) a little as
required, so that it slots into the turntable
drive (7).
3. Always place the cooking container on
the turntable. This ensures that the mi-
crowaves are distributed evenly, and that
any liquid overflow from the food into the
appliance is avoided.
Electrical connections
• Check whether the appliance's supply
(3)
voltage is compatible with the supply volt-
age used in your house (please see the
type plate).
• Please ensure you only connect the ap-
pliance to a professionally installed pro-
(6)
tective contact socket with sufficient fuse
(7)
protection (see "Technical specifications"
on page EN-25).
• The plug socket must be located away
from the reverse side of the microwave,
otherwise the plug will be in contact with
the back plate.
• Do not use any multiplugs, extension
cables, timer switches or remote control
systems.
• Once connected, you will hear a beep
and the display will show 0: 0 0.
Cooking chamber door and
lighting
The cooking chamber light switches on auto-
matically when the appliance is in operation.
If the cooking chamber door (1) is opened
while the appliance is in operation, the cook-
ing process will be stopped.
Page EN-19