hanseatic AC925EC3-S00E Gebrauchsanleitung Seite 57

Problem Possible cause
The dish does not The power or time is set too
heat up enough. low.
The dish was very cold
when being placed inside.
Container is unsuitable if
it becomes hotter than the
dish.
Cooking cham- The dish releases moisture. No error. Simply wipe away any moisture
ber door and/or
viewing window
steams up.
Buttons don't The button lock is activated. Press and hold the "Stopp/Löschen" button
respond when
pressed.
Fan continues to This is a feature of the ap-
run after cooking pliance's cooling system,
time has finished. and does not signify a de-
fect.
Troubleshooting table
Solutions, tips
Heat the dish for a little more time in the
appliance.
Use a suitable container.
after operation.
(11) for 3 seconds (see „Button lock (child
lock)" on page GB-14).
No measures required. The fan will turn off
by itself later.
Page GB-27