Timer Mode; Setting­alarm­times - Grundig DKR 700 DAB+ Bedienungsanleitung

TIMER­MODE
Setting­alarm­times
1 Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 AKT«.
2 Open the menu with »MENU«.
3
Select the option »SYSTEM« with »+­VOL.­-«
and press »SELECT/INFO« to confirm.
4
Select the option »ALARM« with
and press »SELECT/INFO« to confirm.
– Display: »ALARM« flash.
5 Press »SELECT/INFO«, set the hours by press-
ing »+­VOL.­-« and press »SELECT/INFO« to
confirm.
6 Set the minutes with »+­VOL.­-« and press
LECT/INFO« to confirm.
7
Select alarm (»BUZZER« = signal tone, »DAB«
= DAB station or »FM« = FM station) with
VOL.­ -« and press »SELECT/INFO« to con-
firm.
Note:
If the alarm is set to »DAB« or »FM«, then
7
select the desired station (only if stations
are stored on presets
VOL.­-« or select the option »DAB« (the last
listened station) and press »SELECT/INFO«
to confirm.
8
Select the desired alarm day (Daily, Once,
Weekends or Weekdays) with »+­VOL.­-«.
Notes:
If the alarm is set to „Once" continue with
7
step 9.
Otherwise, end settings with step 12.
7
9­
Set the day with
»SELECT/INFO« to confirm.
10­
Set the month with
»SELECT/INFO« to confirm.
11­
Set the year with »+­VOL.­-«.
12 Press »SELECT/INFO« to confirm the setting.
– Display: »ON«.
­--------------------------------------------------------------------------------------------------------------------------
»+­ VOL.­
»SE-
1 to 10) by using
»+­ VOL.­ -« and press
»+­ VOL.­ -« and press
13
Press »SELECT/INFO« to confirm the alarm;
or
cancel the alarm, select the option »OFF« with
»+­VOL.­-« and press »SELECT/INFO« to con-
firm.
– Display: »SAVED«.
Note:
You can also activate and deactivate the
-«
7
alarm by pressing »AUTO­TUNE«, if the de-
vice is switched off.
Pausing­the­alarm
1
Press any button (except »ON/OFF«) while
the alarm is sounding.
– Display: »Z
– The alarm (signal tone or radio) stops.
– The alarm goes on again with 5-minute inter-
vals (the total alarm time is 90 minutes).
»+­
Canceling­alarm
1
Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
»+­
next day at the same time.
Activating­and­deactivating­the­
alarm
1
Press »ON/OFF« to switch off the device.
2 Press »MODE­ ­ SCAN­ ­
vate the alarm.
– Display: »OFF« and »e« or »
pears.
– The set alarm time is saved.
3 Press »MODE­­SCAN­­ALARM« to reactivate
the alarm.
– Display: »ON« and »e« or »
Z
Z §
« and »e« or »
ALARM« to deacti-
§
§
«.
ENGLISH
« will flash.
§
«.
« disap-
23­ ­