Timer Mode - Grundig TR 2500 DAB+ Handbuch

TIMER­MODE
Setting­the­alarm­times­and­
mode
Note:­
You can select the »Alarm
7
menu also by pressing and holding down
»Mode/Alarm« in stand by mode.
1 Press »ON/OFF« to switch on the device.
– Display: e.g. »B5 akt«.
2 Open the menu with »MENU«.
3
Select the option »System« with »
Skip­
« and confirm by pressing »Select/i«.
e
4 Select the option »Alarm« with »
Skip­ « and confirm by pressing »Select/i«.
e
– Display: »Alarm Setup« flash.
5
Press »Select/i« drücken.
– Display: »Alarm Wizard« and »Alarm
Off«.
6
Activate the alarm stand-by with »
Skip­
« (»Alarm
e
pressing »Select/i«.
– Display: »On time«, the hours flash.
7 Set the hours with »
confirm by pressing »Select/i«.
8
Set the minutes with »
confirm by pressing »Select/i«.
9 Select the desired alarm mode (Daily, Once,
Weekends or Weekdays) with »
Skip­ «.
e
Note:
If the alarm is set to „Once", select the
7
date (day, month and year) with »
ing/Skip­ « and confirm by pressing
e
»Select/i«.
10­
Select alarm (»Buzzer« = signal tone,
»DAB« = DAB station or »FM« = FM station)
­ Tuning/Skip­
with »
r
pressing »Select/i«.
26­ ­ ENGLISH
­--------------------------------------------------------------------------------------------------------------------------
Setup«
­Tuning/
r
­Tuning/
r
­Tuning/
r
On«) and confirm by
­ Tuning/Skip­ « and
r e
­Tuning/Skip­
« and
r e
­ Tuning/
r
­ Tun-
r
« and confirm by
e
Note:­
If the alarm is set to »DAB« or »FM«, then
7
select the desired station (only if stations are
stored on presets 1 to 10) by using »
ing/Skip­
« or select the option »Last
e
listened« (the last listened station) and
press »Select/i« to confirm.
11­ Select the alarm volume with »
Skip­ « and confirm by pressing »Select/i«.
e
– Display: »Alarm saved«.
12­­
P ress »Menu« to end the setting.
– Display: » « or »§«.
e
Interrupting­the­alarm
1 Press any button – except »ON/OFF« – while
the alarm is sounding.
– Display: »e« or »
– The alarm (signal tone or radio) stops.
Note:
The alarm will sound again depending
7
on how often a button has been pressed
(1 time = after 5 minutes, 2 times = 10 min-
utes, 3 times = 15 minutes, 4 times = 30 min-
utes. The total alarm time in 90 minutes.
Cancelling­alarm­stand-by
1
Press »ON/OFF« while the alarm is sounding.
– Display: the current time and »e« or »
– The alarm (signal tone or radio) stops, but
the alarm function remains activated for the
next day at the same time.
Activating­and­deactivating­the­
alarm
1
Press »ON/OFF« to switch off the device.
2
Press »»Mode/Alarm«« to deactivate the
alarm stand-by.
– Display: »Alarm off« and »e« or »
disappears.
– The set alarm time is saved
3
Press »Mode/Alarm« to reactivate the alarm
stand-by.
– Display: »Alarm on« and »e« or »
­Tun-
r
­ Tuning/
r
§
« flash.
§
§
§
«.
«
«.