Technical Data; Noise Information; Declaration Of Conformity - Bosch PTS 10 Bedienungsanleitung

OBJ_BUCH-783-007.book Page 31 Friday, June 27, 2014 9:29 AM
15 OFF button
16 Angle stop
17 Ring spanner (23 mm; 13 mm)
18 Auxiliary stop of the angle stop 16
19 Fastening screw of saw-blade storage
20 Mounting holes
21 Guide groove for angle stop
22 Push stick
23 Fastening knob for table extension 2
24 Locking lever of the sliding table
25 Fastening knob for parallel fence 9
26 Fastening knob for table width enlargement 10
27 Storage for auxiliary stop 18
28 Storage for parallel guide 8
29 Locking knob for adjustment of bevel angles
30 Cable holder
31 Chip ejector
32 Storage for angle stop
33 Vacuum hose
34 Bottom plate
35 Hexagon bolt for fastening of the riving knife 4
36 Insert-plate notches
37 Saw blade
38 Fixture for riving knife
39 Fastening kit for "table extension"
40 Rubber buffer
41 Guide rail of the angle stop
42 Locking knob on the angle guide
43 Fastening kit "for auxiliary stop/angle stop"
44 Clamping handle of the parallel guide
45 Guide groove for parallel guide 8
46 Clamping lever of auxiliary stop 7
47 Spindle lock lever
48 Clamping nut
49 Clamping flange
50 Mounting flange
51 Tool spindle
52 Locking knob for bevel angle (horizontal)
53 Angle indicator on the angle guide
54 Handwheel
55 Indicator for bevel angle
56 Scale for bevel angle
57 Lens
58 Scale for clearance of the saw blade to the parallel fence 9
59 Adjusting screw for setting the standard 90° bevel angle
60 Adjusting screw for setting the standard 45° bevel angle
61 Screw for bevel angle indicator
62 Nut for adjustment of the parallel-fence 8 tensioning
force
63 Adjusting screws for sliding-table play
64 Adjusting screws for insert plate
Bosch Power Tools
65 Recessed handles
66 Fastening kit for "base unit"*
67 Base unit*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.

Technical Data

Table saw
Article number
Rated power input
No-load speed
Reduced starting current
Weight according to
EPTA-Procedure 01/2003
Protection class
Dimensions (incl. removable product features)
Width x depth x height
Maximum workpiece dimensions, see page 35.
The values given are valid for a nominal voltage [U] of 230 V. For differ-
ent voltages and models for specific countries, these values can vary.
Dimension of suitable saw blades
Saw blade diameter
Blade body thickness
Tooth thickness/setting, min.
Mounting hole diameter

Noise Information

Sound emission values determined according to
EN 61029-2-1.
Typically the A-weighted noise levels of the product are:
Sound pressure level 91 dB(A); Sound power level
104 dB(A). Uncertainty K =3 dB.
Wear hearing protection!

Declaration of Conformity

We declare under our sole responsibility that the product de-
scribed under "Technical Data" is in conformity with all rele-
vant provisions of the directives 2011/65/EU, 2014/30/EU,
2006/42/EC including their amendments and complies with
the following standards: EN 61029-1, EN 61029-2-1.
EC Type Examination No. 4811001.11001 by notified test-
ing agency No. 2140.
Technical file (2006/42/EC) at:
Robert Bosch GmbH, PT/ETM9,
70764 Leinfelden-Echterdingen, GERMANY
Henk Becker Helmut Heinzelmann
Executive Vice President Head of Product Certification
Engineering PT/ETM9
Robert Bosch GmbH, Power Tools Division
70764 Leinfelden-Echterdingen, GERMANY
Leinfelden, 30.06.2014
English | 31
PTS 10
3 603 M03 4..
W 1400
-1
min 5000

kg 26
/II
mm 620 x 770 x 450
mm 254
mm 1.8
mm 2.5
mm 30
1 609 92A 0VS | (27.6.14)