Maintenance And Service - Bosch PTS 10 Bedienungsanleitung

OBJ_BUCH-783-007.book Page 37 Friday, June 27, 2014 9:29 AM
Storage and Transport (see figure O)
Storing the Power Tool
For storage purposes, the hold-down stick, stops/guides and
spare saw blades can be securely fastened to the power tool.
– Bring the machine into the transport position. (see "Trans-
port Position", page 34)
– Undo auxiliary stop 7 from parallel guide 8 and auxiliary
stop 18 from angle stop 16.
– Insert the guide/stops 8, 16 and 18 into their correspond-
ing storage compartments and fasten push stick 22.
– Wind the mains cable around the cable holder 30.
– A spare saw blade can be fastened to the machine housing
for storage with help of the fastening screw 19.
Carrying the Power Tool
 The power tool should always be carried by two per-
sons in order to avoid back injuries.
 When transporting the power tool, only use the trans-
port fixtures. Never carry the power tool by the protec-
tive devices, the table extension 2 or the table width
enlargement 10.
– For lifting or transporting, hold the power tool by the re-
cessed grips 65 on the side of the saw table 11.

Maintenance and Service

Maintenance and Cleaning
 Before any work on the machine itself, pull the mains
plug.
If the replacement of the supply cord is necessary, this has to
be done by Bosch or an authorized Bosch service agent in or-
der to avoid a safety hazard.
Cleaning
For safe and proper working, always keep the power tool and
its ventilation slots clean.
Remove dust and chippings after each operation.
Measures for Noise Reduction
Measures on behalf of the manufacturer:
– Soft starting
– Delivery of the machine with a saw blade developed partic-
ularly for noise reduction
Measures on behalf of the user:
– Low-vibration assembly on a firm working surface
– Use of saw blades with noise-reducing functions
– Regular cleaning of saw blade and power tool
Accessories
Stand base
Saw blades for wood and plate materials, panels and
strips/mouldings
Saw blade 254 x 30 mm, 40 teeth
Saw blade 254 x 30 mm, 60 teeth
Bosch Power Tools
After-sales Service and Application Service
In all correspondence and spare parts order, please always in-
clude the 10-digit article number given on the type plate of
the machine.
Our after-sales service responds to your questions concern-
ing maintenance and repair of your product as well as spare
parts. Exploded views and information on spare parts can al-
so be found under:
www.bosch-pt.com
Bosch's application service team will gladly answer questions
concerning our products and their accessories.
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
At www.bosch-pt.co.uk you can order spare parts or arrange
the collection of a product in need of servicing or repair.
Tel. Service: (0844) 7360109
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: (01) 4666700
Fax: (01) 4666888
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: (01300) 307044
Fax: (01300) 307045
Inside New Zealand:
Phone: (0800) 543353
Fax: (0800) 428570
Outside AU and NZ:
Phone: +61 3 95415555
www.bosch.com.au
Republic of South Africa
Customer service
Hotline: (011) 6519600
Article number
Gauteng – BSC Service Centre
2 607 001 967
35 Roper Street, New Centre
Johannesburg
Tel.: (011) 4939375
Fax: (011) 4930126
2 608 640 443
E-Mail: bsctools@icon.co.za
2 608 640 444
English | 37
1 609 92A 0VS | (27.6.14)