JVC TK-C676 Bedienungsanleitung Seite 39

Ceiling flush mount
bracket attached to the
ceiling
Ceiling
mount
Hook
MEMO
Both the ceiling flush mount bracket and the drop prevention attachment should be insulated from the ceiling structure.
If the ceiling structure is made of a metallic material, an improper insulation with the camera may produce noise in the video.
Anchor bolt
4.
mount holes
Connect cables to the Ceiling Mount.
5.
Attaching a safety wire to the ceiling mount.
Attach a safety wire to the ceiling mount and to the ceiling slab or
channel to prevent the unit from dropping. First attach the safety
wire to the ceiling mount by passing the wire through the safety wire
Lock
hole.
screw
6.
Attach the Ceiling Mount to the Ceiling Flush Mount
Bracket.
• Attach the Ceiling Mount to the Ceiling Flush Mount Bracket, tak-
• Please use the four screws provided (M4 x 12 mm). If the screws
• Attach so that the lock screw of the Ceiling Mount is positioned be-
7.
Attach the camera to the Ceiling Mount.
Ceiling panel
8.
Attach the ceiling panel.
Attach the ceiling panel, provided with the Ceiling Flush Mount Brack-
et, by attaching the two hooks one by one.
P. 14, "Connection Cables"
1.
P. 16, step "Attaching a safety wire".
ing care not to catch the connection cables.
that have been removed in step
may not be installed properly and may fall.
low the anchor bolt mount hole of the Ceiling Flush Mount Bracket.
P. 16, "Attaching the Camera"
2.
above are used, the camera
E-39