Product-Specific Safety Instructions - ULTIMATE SPEED UPK 10 A1 Originalbetriebsanleitung

immediately with clean water
and seek medical attention�
Product-specific safety
instructions
We recommend charging the
power bank with compressor
once a month�
6
A slightly higher temperature
during charging is absolutely
normal and not a malfunction�
However, we do recommend
leaving the power bank with
compressor to
6
15 minutes before using�
Protect the power bank with com-
pressor from
6
high temperatures, including fires�
Store the power bank with com-
pressor in a dry place and
6
protect the device from moisture
and corrosion�
If you notice the power bank
with compressor
producing an unusual odour or
looking deformed in any way,
stop using the device immedi-
ately and
manufacturer�
rest for
moisture and
leaking,
6
contact the

Product-specific safety instructions

Do not drop the power bank
with compressor
being used�
The power bank with compres-
sor is designed for use with
6
car tyres� It is not designed for
use with large tyres like tractor
or truck tyres�
During inflation, high temper-
atures can be produced at the
air outlet� There is a risk of burn
injuries!
When using the jumper cable
, ensure that the blue plug
11
is securely plugged into the
vehicle jump-start outlet
When using the jumpstart fea-
ture, ensure that 3 indicator
lights are illuminated�
5
If the blue LED lamp goes out
during the jumpstart, charge the
power bank with compressor
�
6
If the vehicle does not start after
3–5 attempts, stop the jumpstart
procedure and check to see if
there are other reasons why the
vehicle is not starting�
while it is
6
�
7
GB / IE / NI 37