Safety Instructions Specific Safety Instructions Before Use - ULTIMATE SPEED ULGD 10 A1 Originalbetriebsanleitung

Safety instructions / Specific safety instructions / Before use
cover caps
20
connecting cable
This prevents any possible
short circuit through contact
with rain or splashed water.
CAUTION: How to
avoid accidents and
injuries resulting from
electric shock:
Electrical safety:.
Do not carry the device by
„
the cable. Do not unplug
the plug from the socket by
pulling on the cable. Protect
the cable from heat, oil and
sharp edges.
If the cable is damaged,
„
unplug the plug immediately
from the socket.
z Specific safety
instructions
A slightly higher temper-
„
ature during charging is
absolutely normal and not
a malfunction.
Protect the vehicle battery
„
charger from moisture and
1
high temperatures, including
fires.
Store the vehicle battery
„
charger in a dry place
1
and onto the
16
and .
18 17
and protect the device from
moisture and corrosion.
Do not drop the vehicle
„
battery charger
being used.
z Before use
Take all parts from the packaging
„
and check whether the device or
parts show any damage. If this is
the case, do not use the device.
Contact the manufacturer via
the indicated service address.
Remove all transport packaging.
Check that the delivery is complete.
Always pull the mains plug from
„
the socket before you perform
any work at the vehicle battery
charger.
1
Before connecting the charger
„
please read the user instructions
for the battery.
In addition, you must adhere to
„
the instructions from the vehicle
manufacturer where a battery
is continuously connected in the
vehicle. Secure the vehicle, switch
the ignition off.
Clean the battery poles. Make
„
sure that the dirt does not come
into contact with your eyes.
Make sure that there is sufficient
„
ventilation.
Note: The ambient temperature is
measured in the charger. Hence,
for optimum function, make sure the
while it is
1
GB/IE/NI 15