JVC KD-LH401 Bedienungsanleitung Seite 64

3
Start searching for an ensemble.
To search for ensembles of lower frequency
When an ensemble is received, searching
stops.
To stop searching before an ensemble is
received, press the same button you have
pressed for searching.
4
Select a service (either primary or
secondary) you want to listen to.
To select the previous service (either
primary or secondary)
To tune in to a particular ensemble
without searching
Before you start....
Press FM/AM DAB briefly if CD, CD changer, or
external component is the current source.
1
Press and hold FM/AM DAB to select the
DAB tuner as the source.
2
Press FM/AM DAB repeatedly to select the
DAB band (DAB1, DAB2, or DAB3).
Press and hold ¢
3
than one second.
Press ¢
4
ensemble you want is reached.
• If you hold down the button, the frequency
keeps changing until you release the
button.
Press 5 (up) or ∞ (down) to select a service
5
(either primary or secondary) you want to
listen to.
64
To search for ensembles
of higher frequency
To select the next service
(If a primary service has
some secondary services,
they are selected before the
next primary service is
selected.)
or 4
for more
or 4
repeatedly until the
When surrounding noises interfere your
listening while driving
If this happens, especially when you are listening
at a low volume level, you can reinforce the
sounds to improve for your listening.
For this purpose, some service provides
Dynamic Range Control signals together with
their regular program signals.
1
Press M MODE while listening to a DAB
service.
"Mode" appears on the display.
The next-step-operation buttons
start flashing.
2
Press number button 1 repeatedly to activate
the DRC function while "Mode" is still on the
display.
Each time you press the button, the DRC
function will be set as follows:
As the number increases, the DRC effect level
also increases.
After about
5 seconds
DRC indicator appears.