Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INT
Mistral P/Prestige
Unfolding the Chassis
Folding the Chassis
the right-hand side of the stroller has been pushed. You
can reduce the storage size further by folding down the
top of the handle.
Assembling and removing the wheels
Seat cover
The seat cover can be removed completely from the se-
at unit for washing. Simply open the snaps on the seat
unit.
Attention: When mounting the seat cover, thread the
ends of the 5-point restraint back through the relevant
openings without twisting the straps.
10
Pull up the folding handle 1
(hand grip) till it locks in one
sharp movement so that both
handle ends 2 fully engage in
the left and the right lock.
WARNING: Ensure that
all the locking devices
are
engaged
before
use.
Pivot the folding handle to the
side with the locking rods.
Now pull the two unlocking
rods on both sides 1 up -
wards and press the slide for-
wards. The chassis is folded
up to the arrester 2, which
prevents inadvertent folding.
The chassis does not fully
fold unless the foot step 3 on
Before assembling or remo-
ving the wheels, press the
locking spring 1. When as-
sembling the wheels, make
sure that the locking spring
engages properly.
Height-Adjustable, Foldable Handle
Swivelling the Foldable Handle
Applying the Parking Brake
To change the height of the
handle, press in the adjusting
buttons on both sides of the
handle.
In order to tilt the slide,
simultaneously pull the two
sockets 1 on the slide
upwards
and
then
tilting. Make sure that the
slide locks again in the two
main clasps on the left and
right and that it is not stuck.
The brake is activated by
pushing down the long brake
lever 1. If it is difficult to
apply the brake, wheel the
stroller back and forth a few
centimetres so that the brake
bars engage properly in the
wheel rim. Make sure that
the brake has locked secure-
ly. You can release the brake
by depressing the brake lever 2.
start
Werbung
