Control Panel-Display/Functions - Panasonic SD-207 Bedienungsanleitung

Control panel-display/functions

Be sure you understand the function of each pad before using the .
NOTE: The unit has a protective film overlay on the control panel to prevent scratching or marring
during shipping.
You may peel this film off and discard it.
SD - 207
DARK LIGHT
TEMP REST
RAISIN
BAKE DOUGH
RAPID ALERT
SANDWICH
L M S
SELECT
SIZE CRUST
TIMER
START
STOP
BASIC
WHOLE WHEAT
MULTIGRAIN
FRENCH
PIZZA
BAKE ONLY
MENU
Display window
All modes and indications are shown here for reference.
MENU
Press to select the type of bread: BASIC, WHOLE WHEAT,
MULTIGRAIN, FRENCH, PIZZA or BAKE ONLY.
(It is not necessary to press this pad for BASIC. )
Each time the pad is pressed, the display will
change accordingly.
SELECT
Press to select the bake mode: BAKE, BAKE
RAPID, BAKE SANDWICH, BAKE RAISIN,
DOUGH or DOUGH RAISIN.
(It is not necessary to press this pad for BAKE .)
Each time the pad is pressed, the display will
change accordingly
SIZE
Press this pad to select the size of the loaf for:
BAKE, BAKE RAPID & BAKE RAISIN modes of
BASIC and WHOLE WHEAT loaves.
CRUST
Press this pad to select the colour of the crust
for BAKE, BAKE RAPID & BAKE RAISIN modes
of BASIC loaf.
TIMER
Press this pad to set the timer and to set the
baking time for BAKE ONLY mode.
The time will advance 10 minutes each time this pad
is pressed. (1 minute for the BAKE ONLY mode.)
The timer setting will change rapidly if constant
pressure is applied to the pad.
Indicating light
The red light will be lit when in operation.
It will flash when the bread baking or the dough
making is completed.
It will also flash in a different frequency when
operated in abnormal conditions.
START/STOP
Press this pad to start operation or begin the timer.
Press this pad to stop operation or cancel the timer setting.
To stop operation, the pad must be pressed and
held for 1 second.
- 10 -
.
®