Programming; Static Data - Weatherdock Easy TRX2S serie Handbuch

17 Programming

17.1

Static data

• Installation of the PC software
o Connection of the easyTRX2S device by means of the supplied
cable to the USB port of the PC
o THEN, connection of the easyTRX2S device to 12VDC
• Start the easyTRX2S Programming Software.
Configuration of ship data (enter the MMSI carefully), although
the MMSI is usually entered by the distributor.
The software is designed plain and simple. You need to enter the
MMSI and the other ship data. Please keep in mind that the MMSI can
only be entered once. Please contact your service partner if the MMSI
was entered wrongly or if you are required to enter a new and
different MMSI. He can reset the MMSI.
To program your ship-specific data connect the easyTRX2S device with
your PC by means of the USB cable. In addition ensure 12VDC power
supply.
Weatherdock AG
Abbildung 27-Static data
Sigmundstraße 180
Tel.: +49 911 376638 30
D-90431 Nürnberg
www.weatherdock.de
Page 68 of 108