Maintenance; Standards - Weatherdock Easy TRX2S serie Handbuch

No data output not connected
Entering MMSI
not possible

22 Maintenance

The easyTRX2S product line does not contain parts that require
maintenance. Avoid using chemical solvents to clean the easyTRX2S as
some solvents can damage the case material.
Unauthorized opening of the device will invalidate the warranty.

23 STANDARDS

This product complies with all necessary standards according to the
European R&TTE directive for Article 3.1(a), 3.1(b), 3.2 and 3.3(e). The
following standards have been followed in pursuance of this:
• IEC62287-1: 2006-03
• IEC60945: 2002-08
• IEC61162-1:

IEC61108-1: GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) –
Part 1:
• EN 301 843-1 v2.1:
Weatherdock AG
MMSI used before?
Sigmundstraße 180
Tel.: +49 911 376638 30
Check connection; are cable
colors correct? Is the data
output of the easyTRX2S device
connected with the data input
of the plotter?
Is the data rate of the NMEA
port of the plotter correct?
(standard value 38400 baud!)
The MMSI cannot be
programmed twice. The device
must be sent back to reset the
MMSI.
Please ask your service partner
for detailed information.
D-90431 Nürnberg
www.weatherdock.de
Page 98 of 108