Diagnostics - Weatherdock Easy TRX2S serie Handbuch

Page 69 of 108
Initially select the COM port the easyTRX2S device is connected to and
click on „connect".
The NMEA port of the Class B Transponder is preset to 38400 baud by
default. You can change the baud rate with the RS422 (NMEA0183)
software if you have a chart plotter whose NMEA input allows only
4800 baud. Please us the grey and yellow cable for this feature.
Another option is the output of GPS information. The devices of the
esasyTRX2S product line can output the GPS data of the integrated
receiver via NMEA or USB port. This is useful if your chart plotter does
not have its own GPS. A minimum output of GPS data (RMC, GGA) is
set as a standard feature by default. It is possible to dismiss the output
entirely or to set it to maximum information (RMC, GGA, GSV, VTG,
GLL and GSA), if the chart plotter requires.
17.2

Diagnostics

If you select the tab „Diagnostics" you will get lots of information
concerning the status quo of the easyTRX2S device.
Error message due to missing MMSI
Weatherdock AG Sigmundstraße 180 D-90431 Nürnberg
Tel.: +49 911 376638 30 www.weatherdock.de