Description
1. Oil filled radiator
2. Handle
3. Power selector. 2 lamps
indicate which power setting
is selected.
4. Variable bi-metal thermostat
5. Power lead holder
6. Foot
7. Castor
Operating instructions
1. Place the infrared heater on a firm, flat and horizontal surface at least 1 m away
from the closest wall or combustible material.
2. Remove the power lead from the holder (5).
3. Turn the thermostat knob clockwise to the maximum setting. Make sure that
the power selector is set to 0 before plugging the radiator into a wall socket.
The radiator must only be used with an earthed power supply (220–240 V AC).
1
2
3
4
5
6
7
7