Scope Of Use - Parkside PT360 Betriebsanleitung

- Do not inhale the welding/ soldering fumes, as they can be poisonous.
- Be aware that the actual size of the flame can be longer than it
appears to be. The flame may hardly be visible under certain light conditions -
danger of burning!
- The burner nozzle and the catalyst adapter become extremely
hot during operation and remain so after the torch has been
extinguished. Take care to protect yourself from accidental burns.
- Ensure that the flame is extinguished completely after use and wait
till the soldering iron has cooled completely before storing the iron.
Otherwise there is danger of burning.

Scope of use

This gas soldering iron set is designed for soft soldering electrical wires and circuit boards,
removing or drying paint and forming plastic. It is also suitable for shrink-fitting and softening
and removing adhesives.
The soldering iron set may be used for only in accordance with its intended purpose. Any
other use is forbidden. The manufacturer cannot be held responsible for damage or injury
caused by use the machine for other than its intended purpose.
It may be used only for attachments appropriate for the gas soldering iron set. Non-
observance of the safety, assembly and operating instructions while operating the machine
counts as misuse.
Persons operating the gas soldering iron and undertaking maintenance activities must be
familiar with them and informed of the possible dangers. Any applicable health and safety
regulations must also be followed.
Any other applicable local and national legislation must also be followed. The gas soldering
iron set may not be modified. The manufacturer can accept no responsibility for damage or
injury caused by modifications to the set.
The gas soldering iron set has not been designed for professional, trade or industrial use, but
for private users in the hobby and DIY sector.
Any other use of the product is expressly forbidden and counts is misuse.
07