Technical Specifications For Mod. No. Plbs 30 B2; Scope Of Use - Parkside PLBS 30 B2 Bedienungs- Und Sicherheitshinweise

Technical specifications for mod. no. PLBS 30 B2

Rated voltage
Rated power
Solder Ø
Protection category I

Scope of use

The soldering iron is designed for soldering of electrical wires and circuit boards as well as
use as a wood burning pen.
The soldering iron set may be used for its intended purpose. Any other use is forbidden. The
manufacturer cannot be held responsible for damage or injury caused by use the soldering
iron for other than its intended purpose.
Only accessories that are suitable for the soldering iron may be used. Non-observance of
the safety, assembly and operating instructions while operating the soldering iron counts
as misuse. The soldering iron may only be operated or maintaned by persons who are
competent to do so and who are aware of the possible dangers. Any applicable health and
safety regulations must be followed. Any other applicable local and national legislation must
also be followed. The soldering iron may not be modified. The manufacturer can accept no
responsibility for damage or injury caused by modifications to the soldering iron.
The soldering iron has not been designed for professional, trade or industrial use and private
users in the hobby and DIY sector. Any other use of the product is expressly forbidden and
counts as misuse.
230 V ~ / 50 Hz
30 W
max. 2 mm
53