Using Your Appliance; Filling The Water Tank - Bosch TDS40 Series Gebrauchsanleitung

Using your appliance

2x
16
B O SCH

1. Filling the water tank

This appliance has been designed to use normal tap
water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or air conditioning systems, or
chemicals will damage the appliance. Any damage
caused by the use of the aforementioned products will
make the guarantee void!
1 Open the filling lid (9).
2 Fill the water tank (7). Never fill beyond the level
"max" (8) for maximum filling !
3 Close the filling lid.
Tip: To prolong the optimum steam function, you may mix
tap water with distilled or demineralised water 1:1. If the
tap water in your area is very hard, mix tap water with
distilled or demineralised water 1:2.
ºC
2. Heating
1 If your steam station is equipped with an iron lock
system (11*), release the iron by pressing the
button.
2 Unwind the supply hose (4) and the mains cable (5).
Plug mains cable into an earthed socket.
3 Press the button (2) to switch the appliance on.
The indicator light (2) will flash indicating that the
appliance is heating up.
4 When the iron is ready to use, the indicator light (2)
will remain permanently lit. Two beeps will be heard.
Important: During the first seconds of use the amount of
steam will be lower and it will increase progressively.
* Model dependent