Using Your Appliance; Filling The Water Tank - Bosch TDi95 serie Gebrauchsanleitung

EN • Operating instructions
Description
1. Ironing programme indicator lamps
2. "SensorSteam" indicator lamp
3. "SET" button
4. "calc" indicator lamp
5. Spray button
6. Shot of steam button
7. "auto" indicator lamp
8. Water inlet lid
9. Spray nozzle

Using your appliance

45º
14
BO S C H
10. Level mark for maximum illing
11. "clean" button
12. Soleplate
13. Heel
14. Power cable
15. Motor activation trigger
16. "MotorSteam" indicator lamps
17. Descaling liquid *

1. Filling the water tank

This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or from air conditioning systems
or chemicals will damage the appliance. Any damage
caused by the use of the aforementioned products will
make the guarantee void!
1 Unplug the iron from the mains.
Open the water inlet lid (8).
2
Fill the water tank. Never ill beyond the level mark
3
for maximum illing (10)!
4 Close the water inlet lid.
Tip: To prolong the optimum steam function, you may mix
tap water with distilled or demineralised water 1:1. If the
tap water in your area is very hard, mix tap water with
distilled or demineralised water 1:2.
Open the lealet sides
* Model dependent