Inhaltsverzeichnis
Werbung
EN • Operating instructions
Description
1. Ironing programme indicator lamps
2. "SensorSecure" indicator lamp
3. "SET" button
4. "calc" indicator lamp
5. Spray button
6. Steam regulator
7. Shot of steam button
Using your appliance
1. Filling the water tank
This appliance has been designed to use normal tap water.
Important: Do not use additives! The addition of other
liquids, such as perfume, vinegar, starch, condensation
water from tumble dryers or from air conditioning systems
or chemicals will damage the appliance. Any damage
caused by the use of the aforementioned products will
make the guarantee void!
1
Unplug the iron from the mains.
Set the steam regulator (6) to the position
2
Open the water inlet lid (8).
3
4
Fill the water tank. Never ill beyond the level mark
for maximum illing (10)!
Close the water inlet lid.
5
Tip: To prolong the optimum steam function, you may mix
tap water with distilled or demineralised water 1:1. If the
tap water in your area is very hard, mix tap water with
distilled or demineralised water 1:2.
8. Water inlet lid
9. Spray nozzle
10. Level mark for maximum illing
11. "clean" button
12. Soleplate
13. Heel
14. Power cable
.
Open the lealet sides
45º
13
B OS CH
Werbung
Inhaltsverzeichnis
