Herunterladen Inhalt Inhalt Diese Seite drucken

Dmx Operation - EuroLite LED Par-64 HCL Bedienungsanleitung

Hypno floor spot
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

DMX operation

Setting the number of DMX channels and the DMX starting address
For operation with a controller with DMX512 protocol, the device is equipped with 24 control channels.
However, it can also be switched to a mode with 3, 6, or 7 channels if different functions are required. To be
able to operate the device with a DMX controller, the DMX starting address must be set for the first DMX
channel. The starting address depends upon which DMX controller is being used. Please refer to the
controller's documentation.
1
Press the MENU button so many times until Addr is indicated in the display. Confirm with the ENTER
button.
2
The display indicates 3 CH (3 DMX channels), 6 CH (6 DMX channels), 7 CH (7 DMX channels), or 24
CH (24 DMX channels). Use the buttons UP and DOWN to select the desired number of DMX channels.
Confirm with the ENTER button.
3
Now the display indicates the menu item for the DMX start address d***. Use the buttons UP and DOWN
to set the address. Confirm with the ENTER button.
4
A dot will light up when DMX signals are being received. If no control signals are available, the dot be
flashing
Note: Please make sure that you do not have any overlapping channels in order to control each device
correctly and independently from any other fixture on the DMX chain. If several devices are addressed
similarly, they will work synchronically.
Functions in DMX mode
3-channel mode
Channel
1
Master dimmer
2
Strobe effect
2
Internal programs
RGBAW+UV LEDs
and hypno rings
6-channel mode
Channel
1
2
3
4
5
6
Value
Function
000 – 255
Total brightness 0-100%
000 – 255
Strobe with increasing speed
000 – 009
No function
Program 1: color change
010 – 049
RGBAW+UV LEDs + hypno rings
Program 2: color change
050 – 089
RGBAW+UV LEDs
Program 3: color change
090 – 129
hypno rings
Program 1: color change
130 – 169
RGBAW+UV LEDs + hypno rings
Program 2: color change
170 – 209
RGBAW+UV LEDs
Program 3: color change
210 – 255
hypno rings
Value
Function
000 – 255
Red 0-100%
Green 0-100%
000 – 255
000 – 255
Blue 0-100%
000 – 255
White 0-100%
000 – 255
Amber 0-100%
000 – 255
UV 0-100%
25/36
00111142, Version 1.0

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

5191402351914024

Inhaltsverzeichnis