Stand-Alone Mode - EuroLite LED Par-64 HCL Bedienungsanleitung

Stand-alone mode

Automatic mode
In automatic mode, 3 show programs are available that run at an adjustable speed.
1 Press the MENU button so many times until Auto is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with the ENTER
button.
2 Press the MENU button so many times until SPEE is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to adjust the running speed of the program from SP 1 (slow) to
SP 9 (fast). Confirm with the ENTER button.
Sound control
Via the integrated microphone the unit can perfectly reproduce the show programs to the rhythm of the
music (sufficient bass provided).
1 Press the MENU button so many times until Soun is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to select the desired show program. Confirm with the ENTER
button.
2 Press the MENU button so many times until SEnS is indicated in the display. Confirm with the ENTER
button. Use the buttons UP and DOWN to Adjust the microphone sensitivity to the volume of the music
(SE 1 = low, SE 9 = high).
3 If you enable the silent scene mode (on setting) in menu item SILE, the LEDs will be switched off if the
volume is too low or if there is no sufficient bass beat. If you disable this mode (off setting) the LEDs
remain on during periods without music.
Preset colors PAR+SMD?
In the Stat mode the primary RGBAW+UV LEDs will constantly emit one of 20 preset colors.
1 Press the MENU button so many times until Stat is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired color. Confirm with the ENTER button.
Individual color mix
In the color mode PAr each of the primary RGBAW+UV LEDs can be individually adjusted for brightness.
The device will constantly emit the color adjusted.
1 Press the MENU so many times until PAr is indicated in the display. Confirm with the ENTER button.
2 Now the display indicates the letter R for the color and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness.
3 Confirm with the ENTER button. Now the color green can be adjusted; then blue, amber, white and UV.
Individual color mix
In the color mode SMd each of the secondary RGB LEDs can be individually adjusted for brightness. The
device will constantly emit the color adjusted.
1 Press the MENU so many times until SMd is indicated in the display. Confirm with the ENTER button.
2 Now the display indicates the letter R for the color and the corresponding brightness value. Use the
buttons UP and DOWN to adjust the desired brightness.
3 Confirm with the ENTER button. Now the color green can be adjusted and blue.
Total brightness
Menu diMM allows adjusting the total brightness for all stand-alone operating modes: Stat, Auto, Soun, Colo.
1 Press the MENU button so many times until diMM is indicated in the display. Confirm with the ENTER
button.
2 Use the buttons UP and DOWN to adjust the desired brightness (dI 1 = dark, dI 9 = bright). Confirm with
the ENTER button.
23/36 00111142, Version 1.0