Operation; Menu Structure - EuroLite LED Par-64 HCL Bedienungsanleitung

OPERATION

After connecting the device to the mains it is ready for operation. The display indicates the last operating
mode. The operating modes can be selected by means of the display and the control buttons. All settings
remain stored even if the device is disconnected from the mains. The device can be operated in stand-alone
mode via the control board and the EUROLITE IR-7 remote control or in DMX-controlled mode via any
commercial DMX controller.

Menu structure

Mode
DMX mode
Preset colors
RGBAW+UV LEDs
Automatic mode
Sound control
Running speed in
automatic mode
Microphone sensitivity for
sound control
Individual color mix
RGBAW+UV LEDs
Individual color mix
hypno ring
Dimmer
Sound control silent
scene
Slave mode
IR remote control
Display
24CH
7CH
Addr
6CH
3CH
Stat S 01-20
Au – 1
Auto Au – 2
Au – 3
So – 1
Soun So – 2
So - 3
SPEE SP 1-9
SEnS SE 1-9
R:000-255
G:000-255
B:000-255
PAr
W:000-255
A:000-255
UV: 000-255
R:000-255
SMd G:000-255
B:000-255
diMM dI 1-dI 9
on
SILE
oFF
SLAU SLAU
on
InFr
oFF
22/36
d001-512 24-channel mode and start address
d001-512 7-channel mode and start address
d001-512 6-channel mode and start address
d001-512 3-channel mode and start address
Constant lighting in one of 20 colors
Program 1: color change
RGBAW+UV LEDs + hypno rings
Program 2: color change
RGBAW+UV LEDs
Program 3: color change
hypno rings
Program 1: color change
RGBAW+UV LEDs + hypno rings
Program 2: color change
RGBAW+UV LEDs
Program 3: color change
hypno rings
Program running speed
> fast
Microphone sensitivity
low > high
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
Amber 0-100%
UV 0-100%
Red 0-100%
Green 0-100%
Blue 0-100%
Total brightness (Stat, Auto, Soun,
Colo and Temp modes) dark > bright
LEDs off if there is no music signal
LEDs remain on if there is no music signal
Slave mode
IR remote control on
IR remote control off
Function
slow
00111142, Version 1.0