Audio Setting; System Information; Audio Output - Yamaha BD-S671 Bedienungsanleitung

SETUP MENU

■ Audio Setting

The default settings are marked with "

Audio Output

Coaxial/Optical
You can select the output mode of COAXIAL jack and
OPTICAL terminal. For more details on output formats,
refer to "About the audio output formats" (p. 35).
Outputs digital signal without any processing.
Bitstream
Secondary Audio is not output.
PCM Outputs 2-channel PCM.
Reencode * Outputs Bitstream with Secondary Audio.
Off Mutes sound.
HDMI
You can select the output mode of HDMI terminal. For
details on setting items, see "Coaxial/Optical" (p. 34). For
more details on output formats, refer to "About the audio
output formats" (p. 35).
*
Bitstream , PCM, Reencode, Off
Note
– To output HD audio (such as Dolby TrueHD or
DTS-HD Master Audio) from HDMI terminal, set
Resolution to Auto or more than 720p (p. 33).
Downsampling
You can select digital audio signal down-sample
frequency. This function is effective for the audio signal
output from the COAXIAL jack/OPTICAL terminal.
* The highest sampling rate of digital PCM output is
48k
48 kHz.
96k The highest sampling rate of digital PCM output is
96 kHz.
192k The highest sampling rate of digital PCM output is
192 kHz.
DRC
You can set the DRC (Dynamic Range Compression)
(p. 41) to on/off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
*
Off, On, Auto
Speaker Setting
2ch Downmix
You can select down mix method to analog 2-ch from
Stereo or Lt/Rt.
Lt/Rt Select this item if this unit is connected to a Dolby
Pro Logic decoder. Sound from rear speakers is
mixed to the 2-ch stereo sound.
* Changes channel output to stereo, which only
Stereo
delivers sound from the two front speakers.
34
En
Post Process
".
*
Up Mix
You can multi-channelize the 2-channel audio signal. To
multi-channelize, select NEO6, then select Cinema or
Music mode.
Off

■ System Information

Software version and MAC address (p. 42) are displayed.
*
, NEO6