Speaker Setting; Audio Setting; Audio Output; System Information - Yamaha BD-S667 Bedienungsanleitung

Note
– This setting is disabled when output resolution is
other than 1080p.
Video Process
Video Adjust
You can adjust the visual image. Press 5/a to select the
parameter, then press 2/3 to adjust the figure.
Brightness Adjusts the overall brightness of the image. To
render a brighter image, increase this figure. To
render a darker image, decrease this figure.
Contrast Adjusts the bright areas (white levels) in the image.
To increase the contrast clarity of the image, increase
this figure. To decrease the contrast clarity of the
image, decrease this figure.
Hue Adjusts the tint of the projected image. To render a
greenish image, increase this figure. To render a
reddish image, decrease this figure.
Saturation Adjusts the richness of the color in the projected
image. To render a richer color, increase this figure.
To render a lighter color, decrease this figure.
The default settings are 0.
Sharpness
You can set the sharpness of objects in the video.
High Renders a sharper image.
Medium Renders a moderately sharp image.
* Renders a softer image.
Low

■ Audio Setting

The default settings are marked with "

Audio Output

COAXIAL/OPTICAL
You can select the output mode of COAXIAL jack and
OPTICAL terminal. For more details on output formats,
refer to "About the audio output formats" (p. 30).
* Outputs digital signal without any processing.
Bitstream
Secondary Audio is not output.
PCM Outputs 2-channel PCM.
Reencode Outputs Bitstream with Secondary Audio. The audio
signal is output in DTS signal.
Off Mutes sound.
HDMI
You can select the output mode of HDMI ternminal. For
details on setting items, see "COAXIAL/OPTICAL" (p. 29).
For more details on output formats, refer to "About the audio
output formats" (p. 30).
Downsampling
You can select digital audio signal down-sample
frequency. This function is effective for the audio signal
output from the COAXIAL jack/OPTICAL terminal.
*
48k
96k
192k
DRC
You can set the DRC (Dynamic Range Compression)
(p. 35) to on/off/Auto. When set to Auto, DRC is
automatically turned on for a source with DRC
information in Dolby TrueHD format. DRC makes the
strong sound such as plosive sound lower, and
conversations more audible. It is useful when you watch
movies in the night.
Off, On, Auto

Speaker Setting

You can set the output from AUDIO OUT L/R depending
on the connected speaker or amplifier.
1 Select the Lt/Rt or Stereo depending on the connected
amplifier's function.
Lt/Rt
Stereo
2 Adjust the volume level output of the left/right
".
*
speakers.
Trim
The default setting is 0 db.
3 Set the distance between the listener and the left/right
speakers.
Delay
The default setting is 0 cm.

■ System Information

Software version and MAC address (p. 36) are displayed.
The highest sampling rate of digital PCM output is
48 kHz.
The highest sampling rate of digital PCM output is
96 kHz.
The highest sampling rate of digital PCM output is
192 kHz.
*
Select this item when this Player is connected to an
amplifier compatible with Dolby Pro Logic.
* Select this item when this player is connected to a
stereo amplifier.
-10 to 10 db (in 0.5 db step)
0 to 1,000 cm (in 5 cm step)
SETUP MENU
4
29
En