Kärcher DUO SB-Sauger Bedienungsanleitung Seite 14

 Push in the suction hose flanges with a
large screwdriver and remove the suc-
tion hose.
Replace filter bag
Removal
 Remove the filter casing.
 Lift both eyelets of the filter bags from
the hooks on the filter housing.
 Turn the filter housing around and turn
the 4 clamping levers to the side.
 Pull the filter bag out of the filter hous-
ing.
Note
Filter bags can be washed in the washing
machine at +40 °C with gentle cycle deter-
gent. Always let the filter bags thoroughly
dry before using them again.
Installation
 Insert filter bag into the filter housing
from the bottom.
 Turn filter housing around and hook
both eyelets of the filter bag into the
hooks in the filter housing.
 Turn filter housing around and push the
tensioning ring of the filter into the pick-
up in the filter housing with a large
screwdrivers.
 Lock the filter bag by turning back the 4
clamping levers.
Warning
Risk of damage! Do not use pointed objects
to push on the tensioning ring.
Replace seal ring in the waste con-
tainer
14
English
 If necessary, rip out the glued, damaged
seal ring and clean the depression.
 Glue new seal ring in using commercial
contact glue.