Technical Specifications; Maintenance And Care - Kärcher DUO SB-Sauger Bedienungsanleitung

Part no.:
Current type
Frequency
Voltage
Connected load
Electrical protection (slow)
Maximum allowed net impedance
Under-pressure
Air quantity
Filter area
Container capacity
Sound pressure level (EN 60704-2-1)
Ambient temperature
Width
Depth without column
Depth with column
Height without column
Height with column
Weight

Maintenance and care

Danger
Risk of injury! The main switch is to be
switched off while carrying out any repairs
or maintenance jobs.
Cleaning the device
Clean device daily or in regular intervals
(depending on suction operation and
amount of dirt).
 Open device door.
 Unhook, empty and reinsert waste con-
tainer.
 Shake both filter bags off by activating
the level of the shaker unit 5 to 10 times.
 Let the dust settle and wait approx. 1
minute.
 Swing the holding plates of the waste
containers down and remove both
waste containers.
 Empty the dirt container.
 Clean the seal ring of the waste contain-
er and check for damage.
 Reinsert waste container. Here, make
sure that the handle of the respective
waste container does not point directly
to the front.
 Swing the holding plates upward.
 Close device door.
Note
The cover has been fitted with a pictorial
brief instruction set for the emptying of the
waste containers.

Technical specifications

MONO
1.261-xxx
-- 1~
Hz 50/60
V 230
kW 2x 0.8
A 16
Ohm (0.312+j0.195)
kPa (mbar) 18 (180)
l/s 2x 50
m 0,4
2
l 25
dB(A) 65
°C -20...+40
mm 550
mm 750
mm 900
mm 1250
mm 1915
kg 100
 Clean the casing with a household
cleaner.
Clean coin acceptor
External influences or impurities on the
coins can lead to the coin acceptor getting
dirtied over a period of time.
Note
Functional disruption due to bent rejection
spring. Do not bend the rejection spring in
the coin movement path.
 Open device door.
 Flip cover up and push towards the rear.
 Pull out the tension spring (1).
 Remove the plate (2).
 Clean the coin slot carefully with a brush
and cleaning liquid (for e.g. washing
petrol, spirit).
Note
Do not oil the parts.
 Insert the plate (2); in the process, en-
sure that you do not bend the rejection
spring (3) in the coin movement path.
 Push over the tension spring (1).
MONO DUO
1.263-xxx 1.224-xxx
3~ 1~
50 50/60
400 230
1,5 4x 0,8
16 16
-- (0.312+j0.195)
21 (210) 18 (180)
56 4x 50
0,4 2x 0.4
25 2x 25
64 65
-20...+40 -20...+40
550 700
750 750
900 900
1250 1250
1915 1915
110 120
 Close cover.
 Close device door.
Remove the filter casing
 Remove the waste container.
A Wing nut
B Filter casing
 Unscrew the wing nut.
 Pull filter casing off in the direction of the
device door and remove.
Remove suction hose
 Remove the filter casing.
DUO
1.247-xxx
3~
50
400
2x 1.5
16
--
21 (210)
2x 56
2x 0.4
2x 25
64
-20...+40
700
750
900
1250
1915
130
13
English