Description Of The Appliance . En - Kärcher WD 3.2 serie Originalbetriebsanleitung

side current-limiting circuit breaker (max.
30 mA nominal tripping current).
Caution
Certain materials may produce explosive va-
pours or mixtures when agitated by the suc-
tion air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust particles)
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combina-
tion with highly alkaline or acidic deter-
gents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
In addition, these substances may cause the
appliance materials to corrode.
Description of the Appliance
Illustrations on fold-out page!

These operating instructions
describe the basic models of
the Multi-Purpose Vacs shown on the
front cover.

The illustrations show the maximum
equipment; depending on the model,
there are differences in equipment and
supplied accessories.
When unpacking the product, make sure that
no accessories are missing and that none of
the package contents have been damaged. If
you detect any transport damages please
contact your dealer.
included in the scope of delivery
possible accessories
Suction hose connection

To connect the suction hose during vacu-
uming.
(see description / illustration
ON/OFF switch for appliance
(without built-in socket)

Position I: Suction or blowing
Position 0: Appliance is switched off

Position I: Suction or blowing
Position II: Automatic vacuuming with
connected electric tool
Position 0: Appliance and the connected
electric tool are switched off
Note: Observe the maximum connected pow-
er (see Chapter "Specifications").

To connect an electric tool.
(see description / illustration

Transport the appliance using the carrying
handle.

To store the mains cable.
(see description / illustration

Connect the suction hose to the blower
connection, this will activate the blower
function.
(see description / illustration

Pull out to open, push in to lock.
(see description / illustration

To rest the floor nozzle during work inter-
ruptions.
(see description / illustration

The accessories compartment allows the
storage of suction pipes and suction noz-
)
zles on the appliance.
(see description / illustration

The steering rollers are located in the
compartment when the appliance is deliv-
ered. These must be attached prior to
starting up the appliance.
(see description / illustration
– 2
EN
ON/OFF switch for appliance
(with built-in socket)
Machine socket
Carrying handle
Cable hook
Blowing connection
Container closure
Parking position
Accessory mount
Steering roller
)
)
)
)
)
)
)
11