Description Of The Appliance . En - Kärcher WD 7000 Originalbetriebsanleitung

side current-limiting circuit breaker (max.
30 mA nominal tripping current).
Caution
Certain materials may produce explosive va-
pours or mixtures when agitated by the suc-
tion air!
Never vacuum up the following materials:
Explosive or combustible gases, liquids
–
and dust particles (reactive dust particles)
Reactive metal dust particles (such as
–
aluminium, magnesium, zinc) in combina-
tion with highly alkaline or acidic deter-
gents
Undiluted, strong acids and alkalies
–
Organic solvents (such as petrol, paint
–
thinners, acetone, heating oil).
In addition, these substances may cause the
appliance materials to corrode.
Description of the Appliance
Illustrations on fold-out page!
When unpacking the product,
make sure that no accessories are
missing and that none of the package con-
tents have been damaged. If you detect any
transport damages please contact your deal-
er.
1 Suction hose connection
To connect the suction hose during vacuum-
ing.
Note: In order to disconnect it, push down
with your thumb and pull the suction hose out.
2 Rotary switch (ON/OFF)
3 Carrying handle
To carry the appliance or to remove the appli-
ance head after unlocking.
4 Filter flap release button
5 Parking position
To rest the floor nozzle during work interrup-
tions.
6 Accessory storage container
This accessory compartment allows the stor-
age of the suction pipes or other accessories.
7 Container closure
Pull out to open, push in to lock.
10
8 Swivel casters
9 Flat fold filter with frame
(already installed in the appliance)
Caution
Filters and their frames must always be insert-
ed during operation.
10 Filter bag intake
Caution: Please do not dispose of!
Is hooked into the interior of the container, is
used to hold the filter bag.
11 Filter bag
Recommendation: To vacuum fine dust, use
the filter bag.
Note: Do not use a filter bag for wet vacuum-
ing!
12 Suction hose with handle
13 Suction tubes 2 x 0.5 m
14 Floor nozzle
(with inserts)
Use the appropriate insert for vacuuming on
hard surfaces and carpets.
Hard surfaces, wet vacuuming: Use the in-
sert with 2 rubber lips.
Hard surfaces, dry vacuuming: Use the in-
sert with 2 bristle strips.
Carpets, wet and dry vacuuming: Work
without an insert.
15 Crevice nozzle
– 2
EN