Original Accessories / Tools; Before Use; Selecting The Grinding Disc; Changing Sanding Sheets - Parkside PEXS 270 A1 Betriebsanleitung

empty the dust container before taking a break
from work. Grinding dust in the dust sack, mi-
crofilter, paper sack (or in the filter sack or filter
of the vacuum cleaner) can ignite automatically
under unfavour-able conditions such as flying
sparks when metal is being ground. There is a
par-ticular hazard if the grinding dust is mixed
with paint or polyurethane residues or other
chemical substances and the material being
ground is hot after being worked on for a pro-
longed period.
W hen working for extended periods
on wood and, in particular, materials
that produce dusts that are hazardous
to health, connect the appliance to an
appropriate external suction device.
P rovide for sufficient ventilation when
working plastics, varnishes and paints.
T he electric tool must only be used for
dry grinding. The penetration of water into
the electric device increases the risk of an elec-
tric shock.
I ntroduce the appliance to the work
piece with it switched on. On task com-
pletion, lift the appliance from the work piece
and then switch it off.
P ermit the switched off appliance to
come to a complete standstill before
putting it down.
T he appliance must always be kept
clean, dry and free of oil or grease.
K eep your workplace clean. Material
mixtures are particularly dangerous. Light metal
dust can burn or explode.

Original accessories / tools

Q
U se only the accessories detailed in
the operating instructions. The use of
inserted tools or accessories other than those
recommended in the operating instructions
could lead to you suffering an injury.
General power tool safety warnings / Before use

Before use

Q

Selecting the Grinding Disc

Q
Metal Removal and Surface:
The rate of metal removal and the surface quality
are determined by the grain size of the grinding disc.
P lease note that corresponding grinding discs
with different grain sizes should be used for pro-
cessing different materials.

Changing sanding sheets

Q
The rotary sander is fitted with a velcro rapid attach-
ment, making possible a quick and easy exchange
of sanding sheets.
L ift the grinding disc
from the backing pad
Note: Before securing a new sanding sheet
remove all dust and dirt from the sander plate
E nsure that the openings in the sanding sheet
concur with the boreholes of the sanding plate

Dust / Swarf Removal by Suction

Q
P lease note the "Safety instructions" section.
Removal by Suction with Dust Collector:
P ush the dust collector
device.
I n order to empty the dust collector
the device.
Note: Empty the dust collector
and regularly in order to ensure the optimum
removal of dust by suction.
External Exhaust Suction (see Illustration A):
Connection:
P ush the adapter for external exhaust suction
on to the exhaust nozzle
to fix it in place. If necessary, use the reducing
piece
external exhaust suction
P ush the hose of an approved suction device
(e.g. a workshop vacuum cleaner) on to the
at the side and pull it off
5
in order to remove it.
4
completely onto the
3
and turn it clockwise
6
by pushing it into the adapter for
8
.
7
,
5
.
4
5
.
4
pull it off
3
in good time
3
7
GB 17