Dive.log - SubGear XP Air Gebrauchsanweisung

2.2 Dive.Log

With Dive.Log you can transfer dive data to a personal computer and graphically display the data.
The following settings may be changed with Dive.Log:
• Unit system
• Audible attention signal suppression
• Gauge mode
• Depth alarm
• Backlight illumination duration
• Maximum partial pressure of oxygen (ppO
• Time limit to reset the O
• Minimum reserve pressure at the end
of the dive (basis for RBT calculation)
• Tank pressure alarm
• Workload sensitivity
The following data may be recalled with Dive.Log:
• Number of past dives
• Total duration of past dives
• Atmospheric pressure
• Pairing information
• Dive profile
• Logbook
• Temperature curve
• Workload curve
• Alarms and attention messages
max)
2
% mix to air
2
System and operation
metric/imperial
selective
on / off
5 - 100 m (20 - 330 feet)
2-12 sec.
1-1.95 bar
no reset / 1 - 48 hrs.
20 – 120 bar (300 - 1750 psi)
50 - 200 bar (750 - 2900 psi)
25 steps
9