Diving with microbubble levels
2 Terminology
This chapter will exclusively deal with terminology and display features used while diving with MB levels.
All other features are described in chapter III (page 15).
2.1 Display during microbubble (MB) no-stop phase
MB level
An MB level
between L1 and
L5 was chosen.
CNS O
%
2
NO STOP
MB no-stop time
Remaining time at a
respective depth allowing
ascent without level stop.
2.2 Display during level stop phase
Total ascent time
including level stops
CNS O
%
2
LEVELSTOP
Level stop depth
The deepest level
stop is displayed.
Level stop duration
The duration of a level
stop at a given level
stop depth is displayed.
30
MB no-stop phase
Dive phase during which surfacing is
possible without MB level stop.
Time
Maximum depth
29.9 m
Time
35.7m
MB no-stop phase
Dive time
21min
Current depth
Total ascent time (14 min)
9m/30ft
Level stop phase
To complete the dive without being
reduced to a lower MB level all
requested level stops must be
observed.
Level stop phase
MB no-stop time
3m/10ft
6m/20ft
Lowest level
stop depth
3 min
Level stop duration