Logbook; Survey; Operation - SubGear XP Air Gebrauchsanweisung

Logbook

VII Logbook

1 Survey

A dive is entered in the logbook if the dive time is longer than 2 minutes. XP AIR records the profiles
of about 100 hours of diving. This information can be transferred to a PC with the standard infrared
interface (IrDA) and the Windows
dive computer.
The following information of the dive is displayed:
Ignored decompression stop* or
diving in SOS mode
Too fast ascent*
Altitude range (if any)
Maximum depth
*Alarms during the dive
F
If a dive is started within adaptation time (after a change of altitude), the adaptation time is
displayed instead of the surface interval.

2 Operation

CNS O %
2
%
36
® software Dive.Log. Up to 99 dives can be displayed directly on the
Logbook icon Diving in gauge mode
MB level reduced*
DECO
%
Fraction of oxygen
Ignored decompression stop*
With the contacts B and + or B and – you can select the logbook. With B
and E you enter the logbook.
If there was a remaining desaturation time (DESAT) before selecting the
logbook, the time since the last dive (surface interval) is displayed.
With B and E you get the most recent dive displayed (LOG 1).
Each bridging of B and + or B and – causes a jump to the next older or
more recent dive. Upon continuous bridging of the contacts all dives are
displayed successively.
With the contacts B and E you can exit the logbook.
The logbook closes automatically after 3 minutes without operation.
Lowest temperature
Dive time
Dive number
CNS O %
2
CNS O
Duration of surface interval
(only with repetitive dives)
Increased workload warning*
dP = differential pressure (gas consumed)
Gas consumed (bar or psi)
value at the end of the dive
2