Level Stop And Deco Stop; Complete A Dive With Mb Levels - SubGear XP Air Gebrauchsanweisung

4.4 Level stop and deco stop

Time
3m/10ft
L0
L5
LEVELSTOP
ft
decompression stop depth
= level stop depth

5 Complete a dive with MB levels

Repetitive dives and microbubble levels: If during a dive a level stop is being ignored and the diver starts
another descent shortly afterwards, XP AIR might immediately request level stops. To complete the dive
with the initially set MB level all level stops must be observed.
L0
Deco stop
duration
Level stop duration
LEVELSTOP
ft
Level stop duration
A dive with MB levels is completed the same way as a dive without MB
levels (L0) (-> 25), save for the following exceptions:
If the MB level has been reduced during the dive, XP AIR will display a
flashing MB level symbol and the current MB level for five minutes after
reaching the surface. The dive is then completed and XP AIR changes to
user mode with the MB level switching back to the original MB setting.
Diving with microbubble levels
When the level stop depth equals the
L5 depth of
decompression stop and if you are
within 1.5m/5feet of the stop depth
itself, XP AIR shows
. The indicated duration
LEVELSTOP
refers to level stop duration.
Since level stops are more restrictive
than decompression stops, when all
decompression
been observed the display changes
from
DECOSTOP
only.
the first obligatory
and
DECOSTOP
obligations have
to
LEVELSTOP LEVELSTOP
33