System And Operation; System Description; Operation; Operating Elements - SubGear XP Air Gebrauchsanweisung

System and operation

II System and operation

1 System description

XP AIR displays all important dive and decompression data and comes with a unique receiver which can
receive tank pressure data from a transmitter. Mounted at the high pressure (HP) outlet of the regulator,
the transmitter measures the tank pressure and radio transmits the information to XP AIR. SUBGEAR's
specially patented transmission process prevents interference and ensures continuous and reliable
reception.
XP AIR has a data memory which stores the dive data. The data can be transmitted with an infrared inter-
face (IrDA) and the Dive.Log software to a Windows® personal computer.
The Dive.Log CD software is included with the XP AIR Package. Infrared interfaces are available in PC
stores. A list of recommended interfaces is available on the SUBGEAR homepage (www.subgear.com).
XP AIR

2 Operation

F
On page 5 you will find an operating schematic

2.1 Operating elements

Contacts
8
Infrared port
Pressure transmitter
XP AIR has 4 operating contacts B, E, +, – on the outside of the housing.
For manual operation, touch base contact B and any one of the other three
contacts above the display with moistened fingers («bridging» contacts).
Contact B: Base contact, which has to be touched for all operations.
Contact E: Enter contact. It serves to switch on XP AIR and to confirm
or enter the displayed value. It is therefore comparable to the ENTER or
RETURN key of a keyboard.
+ / – Contacts: These allow to navigate between menus and, once inside a
menu, to increase or decrease the indicated value.
Dive.Log
Infrared Interface
(option)