HomeMatic CCU2 Bedienungsanleitung Seite 23

• Copy the IP address of your Central Control Unit from the next
window.
• Then enter the IP address into your web browser and you will be
taken to the WebUI user interface.
b) Displaying the IP address via additional software
You can use additional HomeMatic software to display the IP
address of your Central Control Unit. To download the software,
proceed as follows:
• Open the website www.homematic.com.
• Download the installation file for the "HomeMatic LAN Configura-
tor" tool from the Downloads area.
• Install the software on your PC and open the program.
44
• Copy the IP address of your Central Control Unit.
• Then enter the IP address into your Internet browser and you will
be taken to the WebUI user interface.
10.1.2 Connection via USB cable
If you are using your Central Control Unit without a network con-
nection, you can connect the device to your PC using a USB cable.
Additional device drivers are required to do this. To install these,
proceed as follows:
• First connect your Central Control Unit to your PC using the USB
cable supplied.
Power
Internet
Info
45