Assembling The Door Handle; Startup / Operation - BOMANN KSR 350 Bedienungsanleitung

Inhaltsverzeichnis

Verfügbare Sprachen

To assemble the door handles, follow the steps below:

• Position the handle and fix three screws on

the door.

• Install the handle part and use a screw to fix

handle.

Prior to first use

CAUTION: : : :

CAUTION

After transport, the device should be left standing for 4 hours in order for the oil to be collected in the

compressor. Nonobservance could cause damage to the compressor and hence result in failure of the

device. This would void your warranty claim.

• Clean the interior of the device including all accessory parts located inside. Please consider the

instructions that we have included for you in the chapter on "Cleaning and Maintenance".

Turning on

• Turn on the unit by connecting the device to the power supply.

• Operate the temperature control, which is located in the fridge interior. See also the following sec-

tion "Settings".

Settings

Setting 0 0 0 0 means that the unit is in the off state. Turn the temperature control clockwise, starting from

this setting; the device will turn on automatically. The power levels 1 1 1 1 – 7 7 7 7 regulates the different values

of the internal temperature. When opening the door, the interior lamp will turn on.

Setting 0:

off state

Setting 1:

lowest setting (warmest inside temperature)

Setting 7:

highest setting (coldest inside temperature)

Turning the temperature control clockwise will lower the inside temperature. Please keep in mind that

the temperature changes with the ambient temperature (of the location), with the frequency of door

opening and the amount of food in the device.

Assembling the door handle

Inhaltsverzeichnis