Reverse The Door Opening - BOMANN VS 198 Bedienungsanleitung

If required, the door opening can be moved from the right (supplied condition) to the left side.
WARNING: WARNING: WARNING: WARNING:
When replacing the door stop, the device must be disconnected from the power supply. Always unplug
the device first.
• Use a flat bladed screw driver to remove the screw covers at the device top cover. Unscrew the
below screws and remove the device cover.
• Tilt the device slightly backwards and block it in this position in order to avoid the slipping out of the
door.
• Loose the screws of the upper door hinge and remove the hinge along with the hinge pin.
• Open the door a little, take it carefully of the lower door hinge and place it on a padded surface to
prevent it from scratches.
• Turn the separate foot off and remove it and the lower door hinge along with the foot and hinge pin
by unscrewing the screws. Unscrew the pin and put it at the opposite of the hinge.
• Screw the door hinge incl. foot and the separate foot respectively at the device opposites.
• Replace the device upright again. Put the door on the lower door hinge pin and fix the door to its
property position.
• Mount the upper door hinge with the screws at the device opposite, upon you unscrewed the hinge
pin and put it in at the other hinge side again.
• Afterwards the device top cover is to fix on again.
• Check if the door is arranged vertical as well as horizontal, so that a smooth opening and closing of
the door is ensured.
Reverse the D Reverse t Reverse t Reverse t he Door he D he D oor O O O O pening oor oor
22
pening pening pening