service or by qualified person and with a cable of the
same type.
• Use the provided collection points of electrical
equipment for the disposal of the appliance.
Coolant
Coolant
Coolant
Coolant
WARNING:
WARNING:
WARNING:
WARNING:
The coolant circuit of this appliance con-
tains the refrigerant Isobutane (R600a), a
natural gas that is flammable and of high
environmental compatibility. Make sure
no parts of the coolant circuit get dam-
aged during transport and installation of
the appliance.
If the coolant circuit is damaged:
If the coolant circuit is damaged:
If the coolant circuit is damaged:
If the coolant circuit is damaged:
avoid any open flames or ignition
•
source,
disconnect the plug,
•
thoroughly air the room in which the
•
appliance is installed and
contact an authorized technician.
•
Transport & Unpacking the Appl
Transport &
Unpacking the Appli i i i ance
Transport &
Transport &
Unpacking the Appl
Unpacking the Appl
Transport the appliance
Transport the appliance
Transport the appliance
Transport the appliance
Transport the appliance, if possible, in
vertical position. Otherwise, it is absolute-
ly necessary to allow the appliance stand-
ing upright for a few hours before installa-
tion "Prior to first use". Protect the appli-
ance during transport against weather
influences.
NOTE
NOTE: : : :
NOTE
NOTE
The appliance has wheels which facilitate
the transport and installation of the appli-
ance. Tilt the appliance back slightly and
move it gently.
Unpacking the appliance
Unpacking the appliance
Unpacking the appliance
Unpacking the appliance
Remove the appliance from its pack-
•
aging.
Remove all packaging material, such
•
as foils, filler and cardboard packag-
ing.
To prevent hazards, check the appli-
•
ance for any transport damage.
In case of damage, do not put the
•
ance
ance
ance
appliance into operation. Contact your
distributor.
NOTE
NOTE: : : :
NOTE
NOTE
Production residue or dust may have
collected on the appliance. We recom-
24