Cleaning And Maintenance; Repairs - BOMANN KSR 350 Bedienungsanleitung

Vorschau ausblenden

Inhalt

Inhaltsverzeichnis

Verfügbare Sprachen

WARNING:

• Always turn off the device and disconnect the plug or turn off / unscrew the fuse before cleaning

and user maintenance.

• Do not use steam cleaners for cleaning the device; moisture could enter electrical components.

Risk of electric shock! Hot steam could damage the plastic parts. The device must be dry before

Risk of electric shock!

restarting operation.

CAUTION: : : :

CAUTION

• Do not use a wire brush or any abrasive items.

• Do not use any acidic or abrasive detergents.

• Essential oils and organic solvents, such as the juice of lemon or orange skin, butanoic acid or

cleaning agents containing acetic acid can damage plastic parts. Prevent contact of any part with

such substances.

• Do not bend the cooling coils.

For hygienic reasons, clean the interior and accessory parts regularly:

For hygienic reasons, clean the int

• Remove all food and keep covered at a cool location.

• Use warm water and a mild detergent for cleaning the interior (including rear side and bottom).

• Clean the water discharge opening carefully with a pipe cleaner or knitting needle.

• After everything was thoroughly dried, you can restart the operation.

Reverse the bulb

Lamp specifications:

Lamp specifications: 220

Lamp specifications:

220- - - - 240 V, max. 15 W

220

• Remove the screw from the lamp cover.

• Press on the lamp cover and remove to the back.

• Replace the defect illuminant.

• Reattach the lamp cover and fasten the screw.

• Reconnect the device and turn on.

A wrong or improperly performed repair brings danger to the user.

Repairs to electrical appliances must only be carried out by an authorized specialist. A damaged pow-

er cord must be changed only by a qualified electrician.